Bolted Bonnet Swing Check Valve, API 600, 20 Inch, 150 LB
Key Specifications / Features
Model No.: WV-240104-ASCV-09 Hits: 11
As a leading manufacturer based in China, we specialize in crafting high-quality Bolted Bonnet Swing Check Valves. Compliant with API 600, API 6D, BS 1868, and ASME B16.34 standards, our valves are designed for optimal performance. With a size of 20 inches, operating at Class 150 LB and PN20 pressure, these valves are constructed from premium ASTM A216 WCB material.
Request a quoteTags
Detail Information
Design Standard: API 600, API 6D, BS 1868, ASME B16.34
Body Material: ASTM A216 WCB
Nominal Diameter: 20 Inch, DN500
Pressure: Class 150 LB, PN20
Face To Face: ASME B16.10, API 6D, BS EN 558
Test And Inspection: ISO 5208, API 600, BS 6755
Feature: Bolted Cover
Product Range
Size: NPS 2 - 36 Inch
Pressure: Class 150-2500 LB
Design: API 600, API 6D, BS EN 13709, ASME B16.34
Body Material: ASTM A216 WCB, ASTM A352 LCB, ASTM A217 WC6, ASTM A217 WC9, ASTM A217 C12, ASTM A217 C5, CF8, CF8M, CF3, CF3M
End Connection: ASME B16.5, ASME B16.47, ASME B1.20.1, ASME B16.11,DIN 2453-2551, ASME B16.25
Ranges of Materials: nine grades of carbon, low alloy and stainless steels, other grades of alloy and stainless steel
Available Modifications For VERVO Steel Valves
Applicable Standards:
STEEL CHECK VALVES, API 6D
STEEL CHECK VALVES, ISO 14313
STEEL VALVES, ASME B16.34
FACE TO FACE, ASME B16.10
END FLANGES, ASME B16.5
BUTTWELDING ENDS, ASME B16.25
INSPECTION AND TEST, API 598, API 6D
Design descriptions:
BC, BOLTED COVER
SWING TYPE, ANTI-ROTATION DISC
RENEWABLE SEAT RINGS
NON-PENETRATE DISC SHAFT
HORIZONTAL OR VERTICAL SERVICE
FLANGED OR BUTT-WELDING ENDS
Body Material: ASTM A216 WCB
Nominal Diameter: 20 Inch, DN500
Pressure: Class 150 LB, PN20
Face To Face: ASME B16.10, API 6D, BS EN 558
Test And Inspection: ISO 5208, API 600, BS 6755
Feature: Bolted Cover
Product Range
Size: NPS 2 - 36 Inch
Pressure: Class 150-2500 LB
Design: API 600, API 6D, BS EN 13709, ASME B16.34
Body Material: ASTM A216 WCB, ASTM A352 LCB, ASTM A217 WC6, ASTM A217 WC9, ASTM A217 C12, ASTM A217 C5, CF8, CF8M, CF3, CF3M
End Connection: ASME B16.5, ASME B16.47, ASME B1.20.1, ASME B16.11,DIN 2453-2551, ASME B16.25
Ranges of Materials: nine grades of carbon, low alloy and stainless steels, other grades of alloy and stainless steel
Available Modifications For VERVO Steel Valves
| Trim changes End connection modifications Packing and gasket changes Operator mounting Handwheel extensions |
Pressure equalizing Customer specified coatings Weld end bore changes Oxygen & chlorine cleaning & packaging |
| A)Eyebolt For 150Lb-8″,300Lb-8″, 600Lb-6″,900Lb/1500Lb/ 2500Lb-4″ & over. |
B)BC Bolted cover. welded cover and pressure seal bonnet in services requiring frequent cycling or with high pressure/temperature variations. |
C)End Connections A choice of flanged, RTJ flanged or butt-welding end for piping flexibility. |
||
| D)Body-to-Cover Joint A male and female joint or tongue and groove joint are used 150Lb to 600Lb valves. Ring joint is used in the body to cover connection in 900Lb & higher-rated valve. |
E)Outside Lever And Weight All external hinge pin swing check valves 12″ and smaller are available with an optional outside lever and weight, internal hinge is available with all swing check valves. |
F)Seat Rings Separate heavy-duty, full ported rings for easy maintenance. Screwed or welded connection into body. |
||
| G)HCU weighted mechanical accumulator This design can be used to either dampen or assist in closing the check valve disc depending on orientation. by using the hydraulic control unit to buffer the action of the disc, the valve opens at lower flow rates. |
Applicable Standards:
STEEL CHECK VALVES, API 6D
STEEL CHECK VALVES, ISO 14313
STEEL VALVES, ASME B16.34
FACE TO FACE, ASME B16.10
END FLANGES, ASME B16.5
BUTTWELDING ENDS, ASME B16.25
INSPECTION AND TEST, API 598, API 6D
Design descriptions:
BC, BOLTED COVER
SWING TYPE, ANTI-ROTATION DISC
RENEWABLE SEAT RINGS
NON-PENETRATE DISC SHAFT
HORIZONTAL OR VERTICAL SERVICE
FLANGED OR BUTT-WELDING ENDS
| Size | NPS 2 Inch - 36 Inch |
|---|---|
| Pressure Rating | Class 150-2500 LB |
| Material | 2"-36": WCB, LCB, WC6, WC9, C12, C5, CF8, CF8M, CF3, CF3M |
| Design & Manufacturing Standard | API 600, BS 1868, ASME B16.34 |
| Face to Face | ASME B16.10, API 6D, BS EN 558 |
| End Connection | ASME B16.5, ASME B16.47, ASME B1.20.1, ASME B16.11, DIN 2453-2551, ASME B16.25 |
| Test and Inspection | ISO 5208, API 600, BS 6755 |
| Operation Method | Swing Type, Lifting Type |
Comment Form
