Page 29 of News

The pipeline has become the main method of energy transportation nowadays. The pipes and valves that emerged at the right moment have developed rapidly, which has greatly promoted...

Under normal circumstances, when the valve is shipped, blind plates are installed at the inlet and outlet of the valve to avoid dust entering from the inlet and outlet of the valve. This also prevents...

The maintenance steps for valves that are in operation are as follows: 1. Cleaning A lot of dust, oil, and medium residues are easy to accumulate on surfaces of a valve, trapezoidal threads...

Ten common misunderstandings about installation of valves that are easily overlooked are listed in this article, which are as follows: 1. The bolt are too long. For the bolts on the...

Among the pressure-bearing valves of industrial pipelines, cast steel valves are widely used because of their economy and design flexibility. However, various casting defects such as sand...

Technical requirements for boilers safety valves are as follows: 1. At least one safety valve should be installed for boilers with a rated evaporation capacity lower than 0.5t/h; for boilers...

A safety valve is one of the main safety accessories of the boiler. It can automatically prevent the steam pressure of the boiler from exceeding the predetermined allowable range, thereby ensuring...

A safety valve or a globe valve is one of the main safety accessories of steam boilers. As a valve with important protection functions, safety valves are widely used in various pressure vessels...

A valve is an extremely versatile device that can be found almost anywhere. Valves can be seen in houses, power plants, paper mills, refineries and various infrastructure and industrial facilities. Valves are...

Airtightness of liquid The sealing performance of the liquid is performed by the viscosity and surface tension of the liquid. When the capillary of the valve which is leaked is filled...

There are many types of valves, but the basic function is the same, that is, connecting or cutting off the medium flow. Therefore, the sealing problem of the valve is very prominent. To...

Currently, valves generally have defects of poor sealing performance, of which many buyers and even sellers do not know how to solve the problem. After careful study and comprehensive discussion,...