Maintenance and Management of Valves in Gas Transmission Stations
3. Strengthening the maintenance and management of valves in gas transmission stations
3.1 Paying attention to the selection and training of valve manufacturers
The valve is a very important device for the gas transmission station. If the valve provided by the corresponding valve supplier has problems, it will have a great impact on the gas transmission station. Therefore, the selection and training of the valve manufacturer are necessary. Before purchasing the valve, the corresponding staff should be sent to conduct certain research on the manufacturer to ensure that the subsequent purchasing can obtain better materials and resources. Select products with higher strength according to the comparison and actual use requirements, so that there will be no corresponding accidents in the subsequent use.
After choosing the corresponding purchasing manufacturer, the technical research staff should be sent to conduct corresponding training for the corresponding manufacturer, and the valve user should be sent for corresponding training from the corresponding manufacturer to fully understand the composition and structural principle of the valve. In the subsequent use, different technologies are used for timely maintenance according to different situations so as to prevent great economic losses and accidents in the later use process.
3.2 Paying attention to the transportation, storage and installation of the valve
In order to meet higher requirements for quality in the process of selecting valve manufacturers, the manufacturer may be outside the province and in distant areas. Therefore, corresponding management measures should be taken in the transportation of the valve so that valves won’t be damaged due to transportation. In the training process for the transportation staff, the transportation needs of the valve should be emphasized to prevent a situation similar to violent loading and unloading. A great economic loss will cause for the two sides if such a situation occurs. If the truck is unloaded by hand, throwing and stamping are not allowed. The loading and unloading staff may have misunderstandings that the valve is made of metal and has high strength, so they do not treat the valve well. After the transportation is completed, the corresponding valve user department should check whether there is a problem with the quality of the valve after transportation, and whether the valve is damaged in the transportation process. After the acceptance is completed, the installation can be carried out. The transportation, storage and installation of the valve are very important to each other. Therefore, the corresponding staff should pay attention to the corresponding handover.
The storage of the valve also affects the key link of the quality of the valve. After the corresponding inspection of the valve components in transportation and loading and unloading, the valve components without problems will be stored in the warehouse. The corresponding management personnel should check the corresponding models before putting the vale in the warehouse to ensure that all the valves in the warehouse are in line with the corresponding use and production standards. For the dust and water accumulation in the transportation process, the warehouse management personnel should clean the corresponding valves before storage, and use wax sealing for the parts that are prone to rust to ensure that corrosion doesn’t occur in the storage, affecting subsequent use.
3.3 Strengthening the professional maintenance of valves
The selection, transportation and storage of the valve are all key links that will affect the quality of the valve. The corresponding staff should maintain a serious and responsible work style for specific work to prevent mistakes in specific work or the occurrence of great errors, affecting the quality of the final valve.
Before the maintenance of the valve is carried out, the corresponding maintenance should be used, and different maintenance should be provided for the corresponding parts, so that the subsequent maintenance process can be more meticulous and scientific, and the maintenance can be pushed to the profession, which is a key measure for the user to maximize the function of the valve. For the maintenance of valves, different valves have different requirements for maintenance. The corresponding staff should fully understand the operation mechanism of the valve to ensure that it can be cleaned to the greatest extent without being damaged. Some valves have been put into use for a long time. When the valve does not have the function of discharge, corresponding staff are required to manually operate it to ensure that dirty water and oil are removed in time and reduce the risk of corrosion. In addition, ensuring that the valve can have a higher level of professional maintenance requires the corresponding staff to strengthen the corresponding knowledge and skills training, the professional skill of the staff is one of the important factors affecting the final maintenance link. Strictly implementing the maintenance and transportation standards formulated by the corresponding management department will make the gas transmission station have fewer problems and risks in the subsequent valve use process, maximize the use efficiency of the valve, and provide value for the operation of the gas transmission station.
4. Conclusion
In the process of daily maintenance of the valve, the corresponding staff should strengthen serious and responsible attitude towards work, strive to eliminate all accidents and hidden dangers during the maintenance period, and pay attention to the subsequent use and management process. Repair and maintain the corresponding parts, so that the gas transmission station can reduce the economic and safety problems caused by problems of valves in the subsequent operation process and maximize the use efficiency and operation efficiency of the gas transmission station.
3.1 Paying attention to the selection and training of valve manufacturers
The valve is a very important device for the gas transmission station. If the valve provided by the corresponding valve supplier has problems, it will have a great impact on the gas transmission station. Therefore, the selection and training of the valve manufacturer are necessary. Before purchasing the valve, the corresponding staff should be sent to conduct certain research on the manufacturer to ensure that the subsequent purchasing can obtain better materials and resources. Select products with higher strength according to the comparison and actual use requirements, so that there will be no corresponding accidents in the subsequent use.
After choosing the corresponding purchasing manufacturer, the technical research staff should be sent to conduct corresponding training for the corresponding manufacturer, and the valve user should be sent for corresponding training from the corresponding manufacturer to fully understand the composition and structural principle of the valve. In the subsequent use, different technologies are used for timely maintenance according to different situations so as to prevent great economic losses and accidents in the later use process.
3.2 Paying attention to the transportation, storage and installation of the valve
In order to meet higher requirements for quality in the process of selecting valve manufacturers, the manufacturer may be outside the province and in distant areas. Therefore, corresponding management measures should be taken in the transportation of the valve so that valves won’t be damaged due to transportation. In the training process for the transportation staff, the transportation needs of the valve should be emphasized to prevent a situation similar to violent loading and unloading. A great economic loss will cause for the two sides if such a situation occurs. If the truck is unloaded by hand, throwing and stamping are not allowed. The loading and unloading staff may have misunderstandings that the valve is made of metal and has high strength, so they do not treat the valve well. After the transportation is completed, the corresponding valve user department should check whether there is a problem with the quality of the valve after transportation, and whether the valve is damaged in the transportation process. After the acceptance is completed, the installation can be carried out. The transportation, storage and installation of the valve are very important to each other. Therefore, the corresponding staff should pay attention to the corresponding handover.
The storage of the valve also affects the key link of the quality of the valve. After the corresponding inspection of the valve components in transportation and loading and unloading, the valve components without problems will be stored in the warehouse. The corresponding management personnel should check the corresponding models before putting the vale in the warehouse to ensure that all the valves in the warehouse are in line with the corresponding use and production standards. For the dust and water accumulation in the transportation process, the warehouse management personnel should clean the corresponding valves before storage, and use wax sealing for the parts that are prone to rust to ensure that corrosion doesn’t occur in the storage, affecting subsequent use.
3.3 Strengthening the professional maintenance of valves
The selection, transportation and storage of the valve are all key links that will affect the quality of the valve. The corresponding staff should maintain a serious and responsible work style for specific work to prevent mistakes in specific work or the occurrence of great errors, affecting the quality of the final valve.
Before the maintenance of the valve is carried out, the corresponding maintenance should be used, and different maintenance should be provided for the corresponding parts, so that the subsequent maintenance process can be more meticulous and scientific, and the maintenance can be pushed to the profession, which is a key measure for the user to maximize the function of the valve. For the maintenance of valves, different valves have different requirements for maintenance. The corresponding staff should fully understand the operation mechanism of the valve to ensure that it can be cleaned to the greatest extent without being damaged. Some valves have been put into use for a long time. When the valve does not have the function of discharge, corresponding staff are required to manually operate it to ensure that dirty water and oil are removed in time and reduce the risk of corrosion. In addition, ensuring that the valve can have a higher level of professional maintenance requires the corresponding staff to strengthen the corresponding knowledge and skills training, the professional skill of the staff is one of the important factors affecting the final maintenance link. Strictly implementing the maintenance and transportation standards formulated by the corresponding management department will make the gas transmission station have fewer problems and risks in the subsequent valve use process, maximize the use efficiency of the valve, and provide value for the operation of the gas transmission station.
4. Conclusion
In the process of daily maintenance of the valve, the corresponding staff should strengthen serious and responsible attitude towards work, strive to eliminate all accidents and hidden dangers during the maintenance period, and pay attention to the subsequent use and management process. Repair and maintain the corresponding parts, so that the gas transmission station can reduce the economic and safety problems caused by problems of valves in the subsequent operation process and maximize the use efficiency and operation efficiency of the gas transmission station.
